Skip to content
Porte-clés serpent: render of the object, 3D printed in PLA
  • Porte-clés serpent, 3D printed, front view
  • Porte-clés serpent, 3D printed, rear three-quarter view
  • Porte-clés serpent, 3D printed, side view

Porte-clés serpent

3D printed in PLA · 60 × 31 × 6 mm · 1 part · print checks passed

FI@forge-indigo-81· 14 Nov 2026 · published version v1
  • ✓ Verified print-ready
  • Remix allowed · CC BY-NC 4.0
Price per copyBreakdown by material
≈ $23.90 eachincl. VAT, delivered in FranceExact price on its way… it shows up by itself, no need to reload.
PLA
Remix: create your own version, the AI starts from this design.

At a glance

Porte-clés serpent is a design in the “Jewellery & accessories” category, published on objekto by @forge-indigo-81, designed with AI and checked for 3D printing. It is made of 1 printed part. It's a single part: nothing to assemble. Overall size: 60 × 31 × 6 mm, ≈ 5 g. Materials: PLA. Indicative price: from about $23.90 including VAT, manufacturing and delivery in France (priced on 14 Nov 2026). Manufacturing and delivery time: 1 to 3 weeks depending on the material. Licence: CC BY-NC 4.0.

Size, weight and material

Specifications of Porte-clés serpent
Overall size60 × 31 × 6 mm (length × width × height)
Weight≈ 5 g
MaterialsPLA
Printed parts1
Print checksPassed
AssemblyNothing to assemble (single part)
Published versionv1

What's inside

  • S snake with side eyelet
    PLA (FDM) · 60 × 31 × 6
    ×1

The materials →

How it was designed

  1. Its creator described it in a few sentences; objekto's AI designed it part by part.
  2. 1 part to print, in PLA.
  3. The print checks passed: wall thickness, details and size checked for the machine.
  4. Published version: v1.

This is one flat snake in a lazy S, printed on its back so it needs no supports. The body is a solid ribbon, 6 mm thick, and a round lobe behind the head carries a 5 mm hole for your key ring. The ring pulls on the plastic around the hole, and under a 50 N pull the pressure there is 1.7 MPa against a limit of 50 MPa, so the eyelet has a wide margin. The eyes and light scales are engraved on the top face only, so the underside stays flat.

Nothing to assemble: the snake is a single printed piece, and you just thread your key ring through the hole.

Materials & price

PLA$23.90
Indicative, priced on 14 Nov · firm price when you order · via Craftcloud
Product safety information. Manufacturer: objekto · support@objekto.io. Reference: porte-cles-serpent-864d4081 · v1.

Assembly

≈ 2 min in all · The full guide (PDF) comes with every order.

Your snake keyring arrives as a single printed piece: an S-shaped snake with a built-in eyelet. There is nothing to assemble, so the only step is to unpack it and check it. It takes about 2 minutes and needs no tools.

  1. Step 1 of assembling the Porte-clés serpent
    01Unpack the S-shaped snake

    Take the S-shaped snake with its eyelet out of the packaging. Gently brush off any loose powder from the surface and from inside the eyelet with your hands. Check that the eyelet is open and clear so your keys or a ring can pass through it. This takes about 2 minutes and needs no tools.

Frequently asked questions

Porte-clés serpent: how big is it?

60 × 31 × 6 mm overall (length × width × height), weighing about 5 g.

What is it printed in?

In PLA: recommended for decorative objects, prototypes, storage. The parts table gives the material of each part; the materials page details their limits.

How much is it, delivered?

From ≈ $23.90 including VAT, manufacturing and delivery in France (priced on 14 Nov 2026). The exact price is calculated to the cent when you order.

Does it need assembling?

No: it is a single part, nothing to assemble.

Can I change it?

Yes. Its licence (CC BY-NC 4.0) allows remixes: “Remix” creates your own version, the AI starts from this design and you change the size, the shape or the details.

An STL file?

There is no file to download: objekto has the object printed for you in a workshop, then delivers it.

You can look at the 3D model at the top of this page (“View in 3D”).

To change its size or a detail, remix it: the AI starts from this design.

To make your own version or something else, see the personalised gifts page, and the guide how to design a 3D-printable object with AI.

Reviews & print photos

No reviews yet. Only buyers of a delivered order can rate this design.

Remixes · 0

No remixes yet: be the first.

CC BY-NC 4.0 licence · Remixing allowed for non-commercial use, with credit to the creator. The creator allows orders. Licence text

How this page is made

Sizes, weight, parts and materials come from the published 3D model. Prices are quoted by the workshops on the date shown, then recalculated to the cent when you order.